Product Features of the PE Film Washing Line From China

2022-02-17 21:42:55

Product Features of the PE Film Washing Line From China

A PE film washing line is made of several components that perform a simple task. When a film is brought into a recycling plant, it is covered with small soil particles and will need to be ground into smaller flakes. It will need to be washed in two or more stages, dried, and sorted. Each step requires water, which is usually consumed by the machine. Some lines use as much as 2 tons of water per hour. Each machine in a PE film washing line represents a process step.

Product features of the pe film washing line from China

The eight main machines will clean the film and make it suitable for further processing. The washing process uses a trommel screen (also known as a rotary screen). The drum rotates, separating materials as it goes. A trommel screen can remove rocks and sand from the plastic to be reused as a new plastic product.

A PE film washing line is equipped with a trommel screen. This is a circular cylinder with numerous pores and filters out a wide range of materials. The machine can remove sand and rocks from the material. The PE film washing line is configured into an L or U configuration, depending on the amount of contamination in the material. This can ensure the highest quality of plastic scraps.

The main machines of a PE film washing line include conveyor belts, dealers, trommel screens, rotary screens, and washers. The trommel screen is the most important part of the PE film washing line. It is designed to process all kinds of plastic scraps. It can be set up to process different films and make them recyclable. It is also possible to add magnetizing before the PE films enter the crusher.

A PE film washing line has eight main machines designed to remove all contaminants from plastic wastes. There are three different sizes of this machine. The L-shaped line is for the production of PET bottles. It uses a rotary dryer and a trommel screen to separate materials from waste PE films. In addition, the L-shaped one is for PET and PVC, while the U-shaped model is for other materials.

A PE film washing line is an effective solution to the problem of recycling plastic film. Its eight main machines include a trommel screen and a rotary screen. The trommel screens can remove sand and rocks from plastic films. The L-shaped unit is also used to separate recycled film and HDPE/PP bottles. The trommel screen is an important component of the PE film washing line.

The PE film washing line can be configured with several optional modules. These modules can be customized to meet the specific needs of the client. Some clients have dirty films and require two floating tanks and a frictional washer. They may also require a magnet. Alternatively, the PE film washing line can be equipped with a rolling separator. There are several advantages to choosing a PE film washing line from China.

China's PE film washing line is a complete recycling solution for PP films. It includes crushing equipment, a dewatering system, and a packing system. The trommel screen is a cylindrical drum with a lot of pores. Moreover, it can remove sand and rocks from PE films. The whole process of the PE film washing line is efficient and economical. Its output capacity is up to 500kg/h.

LDPE film washing line from China is made of 8 main machines. The trommel screen, also known as a rotary screen, is a cylindrical drum with many pores. The trommel screen is used to separate plastic from oil and sand. It is designed to separate a wide variety of plastic scraps. A PE film washing line from China can be configured in a U or L configuration.

Related Articles

Plastic Extrusion Line Failure Analysis
Plastic Extrusion Line Components
Product introduction of double shaft shredder

Related Products

HIPS/ABS/PP Plastic Washing Recycling Line
Plastic PP/PE Film/woven Bags Washing Recycling Production Line
Fully Automatic 304 Stainless Steel Waste Plastic Films Washing Line
Sitemap