The film squeezer adopts the principle of extrusion dehydration, which is a device that quickly squeezes out the water in the plastic after cleaning the plastic film.
1. Brief introduction:
The machine is equipped with a rotating screw and a special hard tooth surface reducer to squeeze and dehydrate the plastic film, and the squeeze and dehydration effect reaches about 90%. The output can be customized according to customer requirements.
2. Scope of application
It is suitable for plastic films, such as PE agricultural film, PP woven bags, snakeskin bags, space bags, ton bags, plastic sheets, and other waste plastics.
3. Technical parameters
Type | PM-FSM-200A | PM-FSM-270A | CF-FSM-800B |
Machine size | 2250×800×1800 mm | 2450×800×1800 mm | 2450×800×1900 mm |
Inlet Size | 600 × 670mm | 700 × 670mm | 800 × 760mm |
Motor Power | 15 KW | 18.5 KW | 22 KW |
Rotated Speed | 30 r/min | 30 r/min | 30 r/min |
Capacity | 300 KG/H | 500 KG/H | 800-1000 KG/H |
Screw diameter | 280 mm | 300 mm | 380 mm |
Screw length | 1400mm | 1447mm | 1550mm |
Drainage method | Drain at the bottom | Drain at the bottom | Drain at the bottom |
Material outlet | Free falling | Free falling | Free falling |
Hydraulic station motor | 1.2 KW | 1.5 KW | 2.2 KW |
4. Equipment picture
These pictures can better help you understand Waste Plastic Films Squeezing Dryer Machine